Deck Stain and Deck Care

 Taking care of your deck

Decks are a beautiful and functional addition to any home.  They can be a great, inexpensive extension of your indoor living space.  But they’re also a feature that requires regular maintenance if you want to keep them looking good.

Decks take a tremendous amount of harsh treatment from the elements.  As with any horizontal surface, they get a lot of exposure to the sun’s UV rays.  Combining that with the constant barrage of rain and snow that lays on the wood’s surface as well as a steady stream of foot traffic makes them possibly the most heavily-abused area of your home.  In spite of that, a properly cared-for deck will last you for many years.  But there’s more to the seasonal upkeep than slapping-on the occasional coat of deck stain.

Assuming your deck is made of pressure treated wood instead of the new composite type of decking — which requires less maintenance but lacks the charm and attractiveness of wood — following these few simple steps and making the right product choices will extend the life of any deck refinishing project.

Give It A Good Cleaning Before the Deck Stain

deck stainCleaning your deck is vitally important – not only for the purpose of removing the layers of built-up dirt and mildew, but also to help restore the wood to its natural color.  Now, there’s some debate when it comes to the best way to clean a deck.

Pressure washing the wood surface is certainly a quicker and easier way to get through the labor-intensive step of cleaning.  However, an inexperienced operator of a pressure washer can can actually do more harm than good when trying to clean a bare wood surface. 

Some things that will cause harm when using a pressure washer include:

  • using the wrong nozzle
  • holding the wand too close to the surface
  • washing at an incorrect angle
  • concentrating the water in one area for too long

All of these can cause significant damage to the wood fibers and lead to expensive repairs.  

Excessive or incorrect water infusion into wood is often the culprit behind chipping, splintering, warping, cupping, and splitting that are so frequently seen on prematurely aged wooden decking boards.  No matter how well-intentioned, we always recommend that homeowners err on the side of caution and leave deck pressure washing to the trained professionals.

The good news is that you can still effectively clean and restore your deck without having to break out the heavy equipment.

  • Mix a concentrated deck cleaner/restorer with water per the manufacturer’s instructions.
  • Thoroughly wet all of the surfaces to be cleaned with a garden hose.
  • Liberally apply the cleaner with a pressuried sprayer (pump up kind).
  • Allow the cleaner to sit on the surface for a few minutes and then scrub the boards, spindles, and handrail with a stiff bristled brush, long handled deck brush; working in the direction of the wood grain.
  • Using your garden hose, thoroughly rinse the surfaces to wash away the dirt and cleaner residue.
  • If your deck is located in an area where algae tends to grow on the surface of the wood try this: mix some borate at a ratio of 5 parts water to 1 part borate in a mixing bucket. Then, use a drill with a mixing attachment.
  • Apply the borate solution to the damp surface with your pressurized sprayer and do not rinse off.
  • Allow the wood to completely dry for approximately 2-3 days before proceeding to the next step.

 Prep The Surface for Deck Stain

Depending on the age and condition of your deck there may be some additional steps required before you start applying your deck stain. 

Set Nails/Screws – Over time the fasteners that secure your decking boards to the frame tend to work their way loose.  It’s a good idea to scour the surface and recess any protruding nail heads or screws just slightly below the surface.

Sanding – If the wood is weathered or your cleaning work caused the wood grain to raise you may want to consider giving your deck a sanding so it’s not so rough when you walk on it with bare feet.

Using an electric sander, start with a course grit for your first pass.  For the final pass use a medium to fine grit to finish it off.

Apply The Deck Stain

Once you’re done with your color selection you’ll just need to choose the product that best fits your needs.  When it comes to stain selection you have several choices.

Clear Sealer – Some people prefer to maintain the natural wood look and opt for a clear protective sealer.  Know that if you go this route you will be adding the least amount of protection to your deck and you’ll have to re-coat it often – probably every year depending on the amount of wear it gets.

Semi Transparent Stain – If you’re looking to add some color to the deck but still want to be able to see the wood grain then a semi-transparent deck stain is your best option.  As opposed to the clear sealer, just adding some pigment to the wood will serve as a protective barrier between the deck and the elements. It will also keep you from having to re-coat as often – probably every 2-3 years or so, depending on the amount of wear it gets.

Solid Color Stain – Solid deck stain looks very similar to a flat paint when it is applied, so it will cover up much of the wood grain.  It will also give you the most protection for your deck and last the longest.  You can expect to get 2-5 years of life out of a solid color stain depending on the wear.  But unlike clear sealers and S/T stains, solid color stains will peel.

Deck Stain Application

No matter which type of stain you choose there are some best practices you should follow when applying it.

  • Use a pressurized sprayer, roller, or wide staining pad to get the material onto the deck surface. This speeds up the application process.  Make sure you protect any surrounding areas from overspray or spatter with plastic sheeting.
  • Once the deck stain is on the surface use a deck staining brush. Then work it into the grain of the wood.
  • Work in small sections at a time when you’re applying and back-brushing in order to maintain a wet edge.
  • Apply the deck stain in the same direction as the grain of the wood. Work your way down the length of the boards. Confine it to an area that is about 5-6 boards wide with each pass.  This way if you have to stop before the deck is completed you can finish the length of boards you’re working on. Then without having a stopping point in the middle of the boards continue on, avoiding any lap marks.
  • Follow the manufacturer’s instructions when it comes to the number of coats you should apply.  In many cases one coat will be sufficient. That is, unless the wood is old or weathered. In that case it will quickly absorb the first coat.  Some products warn that when applying multiple coats it can actually create a sheen on the deck surface, causing it to become slick.

What Else do I Need to Understand About Deck Stain and Deck Care?

If your deck was just recently built, it is recommended that you wait 6-12 months. Because it takes this long for the wood to weather before staining for the first time.

Once your deck refinishing project is completed all you need to do for maintenance is to give it a gentle cleaning each Spring/Summer.  Then, as it wears, refinish the surface again as necessary. Every few years depending on the type of deck stain or sealer you apply is usually sufficient.

Local SD Painting are your deck staining specialist we have many years experience in staining, so don’t wait.  Are you in San Diego and interested in a deck stain? Call today 619.569.3299

Check us out at: http://www.localsdpainting.com/

Related Links

Messmer’s UV Deck Stain

Popular Deck Stain Colors

Wood Stain Specialist San Diego

2018-09-12T04:22:37+00:00

Leave A Comment